Set-Up And Usage - Razor Powerwing Owner's Manual

set -UP AnD UsAge
q Adjusting the Brake
1
To adjust the brake cable wire,
thread the brake lever adjuster in or
out 1/4 to 1/2 turn until the desired
cable tension is attained.
q How to ride
Place both hands on the handlebars. Place one foot on the platform directly above the caster. Push off with the other
foot then place foot on the other platform directly above the caster. Slightly bend knees. With handlebars straight,
swing hips and legs side to side. Shifting weight on the platforms from right to left in sync with hips and legs. The side
to side motion acts to self propel the PowerWing. No pushing required.
q How to stop
Apply hand brake.
Need Help? Contact our Customer Service Team at 1 800 244 543 or email us at info@funtastic.com.au
2
Squeeze the brake lever to
test the brake to make sure it is
working properly. The front fender
should clamp down and rub against
the front wheel. If brake is not
working properly, proceed to the
next step.
3
If the brake is too tight or too
loose, use a 8 mm wrench and
a 3 mm Allen wrench to make
adjustments as needed.
4
Note:
Do not step off of platforms
until unit has come to a complete
stop.