Before You Begin - Razor Powerwing Owner's Manual

BeFore YoU Begin

Remove contents from box and check parts against part diagram below. Remove the separators that protect the
components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked
cables that may have occurred during shipping. Because the PowerWing is partially assembled and packed at the
factory, there should not be any problems even if the box has a few scars or dents.
q estimated Assembly and set-Up time
Allow up to 15–20 minutes for assembly. Razor recommends assembly by an adult.
Brake Lever
Collar Clamp
Barcode
Front Wheel
q required tools
Tools needed to assemble are included.
Two (2) 5 mm Allen
wrenches
(included)
Need Help? Contact our Customer Service Team at 1 800 244 543 or email us at info@funtastic.com.au
Handlebar Stem
Right Foot Platform
Frame
Coupling Bolt
Left Foot Platform
Rear Caster
Rear Wheel
2
WArning: DO
NOT USE NON-RAZOR
PRODUCTS WITH YOUR
POWERWING.
The PowerWing has been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
not be compatible and will void your
warranty.
PRODUCT I.D. CODE
1. Side of frame.
2. Barcode on side of box
(not shown)