Chauvet Maverick MK2 Wash Quick Reference Manual page 3

Maverick MK2 Wash QRG
Replacing The
Fuse
Signal
Connections
Control
Personalities
DMX Connection
Art-Net™
Connection
sACN Connection
Kling-Net
Connection
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
You can link the Maverick MK2 Wash to a controller or controller software using a
DMX connection, an Ethernet connection, or both. If using other Art-Net™, sACN,
or Kling-Net -compatible products with the Maverick MK2 Wash, you can control
each individually on a single network. See the User Manual for information about
how to connect and configure the product for these signals.
The Maverick MK2 Wash uses DMX, Art-Net™, sACN, WDMX, and Kling-Net
for its control personalities:
Single Control
Advanced (122-channel)
Standard (68-channel)
Basic (20-channel)
Uses DMX, Art-Net™,
sACN, or WDMX
The Maverick MK2 Wash will work with a DMX controller using a 3- or 5-pin
DMX data connection.
www.chauvetprofessional.com.
Art-Net™ is an Ethernet protocol that uses TCP/IP which transfers a large amount
of DMX512 data using an Neutrik® etherCON® RJ45 connection over a large
network. An Art-Net™
www.chauvetprofessional.com.
Art-Net™ for best results.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.
Also known as ANSI E1.31, Streaming-ACN is an Ethernet protocol that uses the
layering and formatting of Architecture for Control Networks to transport DMX512
data over IP or any other ACN compatible network. ACN is maintained by the
Professional Lighting and Sound Association (PLASA).
Kling-Net is a network protocol that allows auto configuration of display devices
using a Neutrik® etherCON® RJ45 Ethernet connection. Refer to the ArKaos
software manual for detailed instructions on programming this product.
For smooth-running operation, ArKaos Kling-Net requires a gigabit (1000
Mbps) Ethernet card and network router.
ArKaos Kling-Net will only run Standard Pixel or Basic Pixel modes.
Dual Control Movement
Advanced (26-channel)
Standard (20-channel)
Basic (8-channel)
Uses DMX, Art-Net™, or
sACN
A DMX
protocol document
Chauvet Professional recommends using unicast
3
Dual Control Pixel
Advanced (96-channel)
Standard (48-channel)
Basic (36-channel)
Uses DMX, Art-Net™,
sACN, or Kling-Net
Primer is available
is available
EN
from
from