Personalisations; Setting The Temperature; Functions - Indesit IWDE 127 Instructions For Use Manual

Table of Contents

Advertisement

Available languages

Available languages

Personalisations

C

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Programme table).
The temperature can be lowered, or even set to a cold wash ( ).
Set the drying cycle
Turn the DRYING knob to set the desired drying type.
Two options are available:
A - Based on time: From 40 minutes to 180.
B - Based on the damp level of the dry clothes:
Iron
: slightly damp clothes, easy to iron.
: dry clothes to put away.
Hanger
Cupboard
: very dry clothes, recommended for towelling
and bathrobes.
A cooling stage is foreseen at the end of the drying cycle.
If your laundry load to wash and dry is exceptionally in excess of the maximum load foreseen (see table opposite), perform the
wash cycle, and when the programme is complete, divide up the garments and put part of them back in the drum. Now
follow the instructions provided for a dry only cycle. Repeat this procedure for the remainder of the load.
Dry only
Turn the PROGRAMME knob to one of the drying settings (7-8) depending on the type of fabric, then select the desired
drying type using the DRYING knob.
Important: - A spin cycle is carried out during the drying if you have set a cotton programme and a level of dryness (Cupbo-
ard
, Hanger
, Iron
- For cotton loads of less than 1 Kg, use the drying programme designed for delicate fabrics.

Functions

To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note:
- If the function selected is incompatible with the programme set, the button will flash and the function will not be enabled.
- If you set a function that is incompatible with another function you selected previously, only the last one selected will be enabled.
Function
Effect
Delays the start of the wash by up to 9 hours.
Delay Timer
This option reduces the amount of creasing on
fabrics, making them easier to iron.
Easy iron
Increases the efficiency of the rinse.
Extra Rinse
1200-600
Reduces the spin speed.
).
Table of drying times
Fabric
Load type
type
Terry towels, Clo-
Cotton
thing of different
sizes
Terital,
Sheets, Shirts
Cotton
Comments
Press the button repeatedly until the LED corresponding to the desi-
red delay is turned on.
The fifth time the button is pressed, the function will be disabled.
N.B.: Once you have pressed the Start/Reset button, the delay can
only be decreased if you wish to modify it.
When this function is set, programmes 6 will end with the laundry left
to soak (Anti-crease) and the Rinse cycle phase
LED
will flash.
- to conclude the cycle, press the START/RESET button;
- to run the draining cycle alone, set the knob to the relative symbol
and press the START/RESET button.
If you also want to run the drying cycle, this button is enabled only if
combined with level
(Iron).
Recommended when the appliance has a full load or with large
quantities of detergent.
The data contained in the
table are purely indicative.
Max.
Cup-
Hanger
Iron
load
board
(kg)
5
250
210
190
3
180
130
115
GB
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents