Table of Contents
Advertisement
Problem
The shaver is
not entirely
clean after I
clean it in the Jet
Clean System.
Possible cause
The temperature of the
shaver is too high. In this
case, the shaver does not
work and the exclamation
mark on the display flashes.
The cleaning fluid in the
cleaning chamber is soiled.
The cleaning fluid level is
too low. If the fluid volume
in the cleaning chamber
drops below the minimum
level during the cleaning
program, the program
aborts.The cleaning light
and the 'cleaning chamber
empty' symbol flash at
intervals and the holder
returns to its starting
position.
You have used another
cleaning fluid than the
original Philips cleaning
fluid.
0
English
Solution
Switch off the shaver
and let it cool down.
As soon as the
temperature of the
shaver has dropped
sufficiently, you can
switch on the shaver
again.
Empty and rinse the
cleaning chamber.
Refill the cleaning
chamber with cleaning
fluid to a level
between the two lines
(see chapter 'Cleaning
and maintenance').
Only use HQ200
Philips Cleaning Fluid.
Advertisement
Table of Contents
