English
AUTO
AUTO
ECO
ECO
INTENSIVE
INTENSIVE
5
Fill the cleaning chamber with HQ200 cleaning
fluid to a level between the two lines.
6
Place the Jet Clean System back onto the
cleaning chamber.
Make sure the release buttons click back into place.
Using the Jet Clean system
Note: If you use the shaver with shaving foam or
shaving gel, we advise you to rinse it under the hot
tap before you clean it in the Jet Clean System. This
guarantees an optimal lifetime for the cleaning fluid.
1
Press the shaver tightly into the holder to lock
it into place.
The display shows that the shaver is charging
,
(see chapter 'The display').
2
RQ1008: Press the up/down button to select a
cleaning program.
3
Press the on/off button on the Jet Clean
System to start the cleaning program.
The shaver display stops showing the charging
,
indication.
The cleaning light starts to flash and the shaver is
,
automatically lowered into the cleaning fluid.
The cleaning light flashes throughout the
,
cleaning program, which takes a few minutes.
Note: RQ1007: The cleaning program takes 4 to 6
minutes.