Philips RQ1290 Manual page 37

3 Put the shaver in the charger and push it
backwards ('click').
The display shows that the shaver is charging
,
(see chapter 'The display').
Charging in the Jet Clean System (specific
types only)
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
3 Place the shaver upside down in the holder
with the display pointing towards the front of
the Jet Clean System.
Note: The shaver cannot be placed in the Jet Clean
System when the protection cap is on the shaving unit.
Note: RQ1290 only: when you turn the shaver upside
down, the minutes indication on the display is also
turned upside down so you can still see to what level
the battery is charged.
4 Press the shaver tightly into the holder to lock
it into place.
The display shows that the shaver is charging
,
(see section 'Charging' in chapter 'The display').
Using the shaver
shaving
1 Press the on/off button once to switch on the
shaver.
The display lights up for a few seconds.
,

English