Table of Contents
Advertisement
Enable Module security
1 At the Start screen, press Menu.
2 Scroll until Settings appears and press the roller.
3 Scroll until Security settings appears and press the roller.
4 Scroll until Module security appears and press the roller.
5 Enter the five digit Module code (12345 is default) and press OK.
Change the Module code
1 At the Start screen, press Menu.
2 Scroll until Settings appears and press the roller.
3 Scroll until Security settings appears and press the roller.
4 Scroll until Change access codes appears and press the roller.
5 Scroll until Change module code appears and press the roller.
6 Enter the current module code and press OK.
7 Enter the new module code and press OK.
8 Enter the new module code again (for verification) and press OK.
Module code changed appears in the display.
[ 72 ]
Advertisement
Table of Contents
