Removal From Storage - Polaris UTV Series 10 2x4 Owner's Manual

MAINTENANCE AND LUBRICATION

Removal from Storage:

1. Check the battery electrolyte level and charge the battery if
necessary. Install it in the vehicle. Make sure the battery vent hose
is routed properly and that it's not pinched or restricted in any way.
2. Make sure the spark plug is tight.
3. Fill the fuel tank with fuel.
4. Check all the points listed in the Daily Pre-Operation Inspection
section beginning on page 47.
NOTE: Tightness of the bolts, nuts and other fasteners should be
checked by an authorized Polaris dealer.
5. Lubricate as outlined in the Periodic Maintenance Schedule.
Do not run the engine in a closed area. Exhaust gases contain
carbon monoxide; a colorless, odorless, poisonous gas.
Breathing exhaust gas leads to carbon monoxide poisoning,
asphyxiation and death.
92
WARNING