Starting The Engine - Polaris UTV Series 10 2x4 Owner's Manual

Starting the Engine

Do not start or operate this vehicle with sticking or improperly
operating throttle pedal. Doing so could cause an accident leading
to severe injury or death.
Always contact your dealer for service repairs if throttle problems
arise.
Failure to check or maintain proper operation of the throttle system
can result in an accident if the throttle pedal sticks during operation.
Always check the pedal for free movement and return before
starting the engine and occasionally during operation.
Procedure for Starting a Cold Engine
1. Place the transmission in neutral.
2. Lock the parking brake.
3. Sit in the driver's seat and fasten
your seat belt.
4. Pull the choke knob all the way out.
5. Turn the ignition key to START.
6. If the engine does not start within
five seconds, release the ignition
switch and wait five seconds. Turn
the ignition switch to START for
another five seconds. Repeat this
procedure until engine starts.
NOTE: Do not press the throttle pedal while starting the engine.
7. If the engine slows or stops, push the choke knob in half way.
8. Vary the engine RPM slightly with the throttle to aid in warm up
until the engine idles smoothly. Then push the choke all the way
in.
WARNING
OPERATION
49