TP-Link TL-WR940N Installation Manual page 9

Hide thumbs Also See for TL-WR940N:

T1.

How do I restore my Router's configuration to its factory default

settings?

With the Router powered on,

press and hold the RESET button

on the rear panel for 8 to 10

seconds before releasing it.

Hold it for 8 to 10 seconds

Once the Router is reset, the current configuration settings will be lost and

Note

you will need to re-configure the router.

T2. What can I do if I don't know or forget my password?

Restore the Router's configuration to its factory default settings. If you don't

know how to do that, please refer to section T1.

Use the default user name and password: admin, admin.

Try to configure your Router once again by following the instructions in the

previous steps of the QIG.

T3.

What can I do if I cannot access the web-based configuration page?

1) Configure your computer's IP Address.

For Windows XP OS

Go to Start > Control Panel,

you will then see the following

page.

Click Network and Internet

Connections

RESET

WAN

POWER