TP-Link TL-WR940N Installation Manual page 6

B
Configuration for Static IP
This page will then display.
Enter the IP Address,
Gateway, DNS provided
b y y our ISP manuall y
Click Next
A fter completing the above configuration, please proceed to
Configuration.
C
Configuration for Dynamic IP
This page will then display.
If you are visiting the Router
from the main computer,
please select Y es
Click Clone MAC Address
Click Next
or
If you are visiting the Router
from another computer, rather
than the main computer, please
select No
Enter the main computer's MAC
in the field WAN MAC Address
Click Next
1. It's strongly recommended that you visit and configure the Router from the
Note
main computer.
2. To find the main computer's MAC, please go to Start > Run on your main
computer, type in cmd and press Enter. At the command prompt, ente r
ipconfig/all and press Enter. The MAC will be displayed under Physical
Address.
6
Wireless Settings