Dell OptiPlex GX1p User Manual page 65
Hide thumbs
Also See for OptiPlex GX1p:
- Service manual (178 pages) ,
- Reference and installation manual (174 pages) ,
- Installation manual (71 pages)
Table of Contents
Advertisement
Control Panel Removal (Midsize Chassis): Dell™ OptiPlex™ GX1p
To remove the control panel, follow these steps:
1. Remove the hard-disk drive bracket.
2. Disconnect the control panel cable from the PANEL connector on the system board.
3. Remove the mounting screw holding the control panel to the chassis.
4. Slide the control panel out of the hooks holding it to the chassis.
5. Note the routing of the control panel cable as you remove it from the chassis.
Advertisement
Table of Contents
