Dell OptiPlex GX1p User Manual page 106

Production Notes
1. Find out what the Tapi connector is on the system board per David Weber's 8/6 message.
2. Question regarding EDO vs. SDRAM
David I want to make sure I understand this correctly. This system uses SDRAM, right? So is the message here: Do not use EDO DIMMS? thanks
Daniel
Memory
I suggest you include a note to users that EDO and SDRAM DIMMs have slightly different gap spacings. This may cause customers to break DIMMs or
sockets by inserting the wrong memory in a system.
3. Update DC Power Distribution (Midsize Chassis), power.htm, fig13.gif.
Giving to GR on 8/13
4. Per David Weber:
Mini-Tower Chassis -- Drive Hardware Removal
The hard drive enclosure on the mini-tower systems has changed. The new hard drive enclosures swing out about 60 degrees without actually disengaging
from the frame, allowing insertion and removal of hard disk drives without removing the entire enclosure. Please update the diagram.
Sent a message to Ken Welch and John Jeffries on 8/13.
5. Edit graphic for internal view of MT (view.gif.) Remove optional from NIC connector and change interface cable to hard-disk drive interface cable.