Program 710 - Clerk Report Descriptor Programming - Samsung ER 5200 Operator's And Programming Manual

Program 710 - Clerk Report Descriptor Programming

The Clerk Report selection allows you to reprogram the descriptors that appear with the Clerk Report
totals and counters. For example, the first total on the clerk report "NET SALES" might be re-labeled
to say "GROSS SALES". You can reprogram any of the Financial Report totals listed here with any
12-character descriptor.
ER 5200/5240 Electronic Cash Register
1. Turn the control lock to the P position.
2. To begin the program, enter 7 1 0, press the SBTL key.
7 1 0
3. Refer to the chart on the next page and enter the number that represents the line you wish
to program; press the X/TIME key.
X X/TIME
X
4. If you are programming using an alpha keyboard overlay, type up to 12 descriptors on the
overlay and press the SBTL key.
Type up to 12
descriptor keys
If you are programming using descriptor codes, enter up to 12 three-character codes and
press the SBTL key.
Enter up to 12 three-
character codes
5. Press the CASH key to finalize the program.
CASH
SBTL
SBTL
SBTL
P-Mode Programming • 155