Program 300 - PLU Descriptor Programming
Program descriptors by typing descriptors on the alpha keyboard overlay or by entering three
digit alpha character codes. To enter descriptors by three digit alpha character codes you must
add a value of '1' to system option #25 (See "System Option Programming" on page 108).
102 • P-Mode Programming
1.
Turn the control lock to the P position
2.
To begin the program, enter 3 0 0, press the SBTL key.
3
0
0
3.
Select the PLU you wish to program in one of the following ways:
Press a PLU key on the keyboard, or
PLU
Enter the number of the PLU and press the PLU key.
4.
If you are programming using an alpha keyboard overlay, type up to 12 descriptors on the
overlay and press the X/TIME key.
Type up to 12
descriptor keys
If you are programming using descriptor codes, enter up to 12 three-character codes and
press the X/TIME key. (See "Descriptor Code Chart" on page 104.)
Enter up to 12 three-
character codes
5.
To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
SBTL
PLU
X/TIME
X/TIME
ER 5200/5240 Electronic Cash Register