Clerk Report - Samsung ER-650 Operation And Program Manual

Clerk Report

The Clerk Report selection allows you to reprogram the descriptors that appear with
the Clerk Report totals and counters. For example, the first total on the clerk report
"NET SALES" might be re-labeled to say "GROSS SALES". You can reprogram any
of the Financial Report totals listed here with any 12-character descriptor.
Samsung ER-650
1. From the LOGO DESC. PROGRAM screen, press 4 to display the
CLERK REP MESG. Screen:
CLERK REP MESG. •
TTL 1 :
NET SALE
TTL 2 :
NONTAX
TTL 3 :
TAX1 SALES
2. The first 3 report descriptors (TTLs 1-3) display with the cursor arrow
pointing at the first message. Using the alpha numeric keyboard overlay,
type the descriptor. Each descriptor can be up to 12 characters. If you
make a mistake, press the BACKSPACE key to erase the previous
character. After you have completed typing the first descriptor, press
ENTER to accept the new message and advance to the TTL, or press ESC
to return to the LOGO DESC. PROGRAM screen without making any
changes.
3. Press ENTER repeatedly, or press PAGE UP and/or PAGE DOWN to
locate the next descriptor you wish to program. After the last item on each
screen, the screen shifts to display the next 3 descriptors. (There are 52
Clerk Report descriptors that you can program.) Using the same
procedure, continue programming each line as necessary. Press ESC at
any time to exit and return to the LOGO DESC. PROGRAM screen.
Program Mode Programming • 207