Wireless - TP-Link TL-WR1043ND User Manual

MAC Address - The physical address of the router, as seen from the LAN. The value can't

be changed.
IP Address - Enter the IP address of your router or reset it in dotted-decimal notation

(factory default: 192.168.0.1).
Subnet Mask - An address code that determines the size of the network. Normally use

255.255.255.0 as the subnet mask.
IGMP Proxy - The Internet Group Management Protocol (IGMP) feature allows your devices

in LAN to watch TV.

Note:
1. If you change the IP Address of LAN, you must use the new IP Address to login the router.
2. If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the
DHCP server will change accordingly at the same time，while the Virtual Server and DMZ
Host will not take effect until they are re-configured.
3. You can enable or disable IGMP Proxy. This feature is enabled by default.
4.6

Wireless

Figure 4-17 Wireless menu
There are five submenus under the Wireless menu (shown in
Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click
any of them, and you will be able to configure the corresponding function.
TL-WR1043ND 450Mbps Wireless N Gigabit Router
Figure 4-16 LAN
-33-
): Wireless Settings,
Figure 4-17