TP-Link TL-WR1043ND User Manual page 26

For ASCII, the key can be made up of any numbers from 0 to 9 and any letters from A to
Z, and the length should be between 8 and 63 characters.
For Hexadecimal, the key can be made up of any numbers from 0 to 9 and letters from
A to F, and the length should be between 8 and 64 characters.
Please also note the key is case sensitive, which means that upper and lower case keys
will affect the outcome. It would also be a good idea to write down the key and all related
wireless security settings.
 No Change - If you chose this option, wireless security configuration will not change!
Click More Advanced Wireless Settings, you will see the picture below.
 Mode - This field determines the wireless mode which the router works on.
 Channel Width - Select any channel width from the drop-down list. The default setting
is automatic, which can automatically adjust the channel width for your clients.
 Channel - This field determines which operating frequency will be used. The default
channel is set to Auto, so the AP will choose the best channel automatically. It is not
necessary to change the wireless channel unless you notice interference problems with
another nearby access point.
These settings are only for basic wireless parameters. For advanced settings, please refer to
4.6 Wireless.
5. Click the Next button. You will then see the Finish page. Click the Finish button to finish the
Quick Setup.
TL-WR1043ND
Figure 3-13 Quick Setup – Finish
-17-
450Mbps Wireless N Gigabit Router