Port Triggers - TP-Link TC-W7960 User Manual

TC-W7960
Enable – Click the

will become .
Modify – Click the

you can click the
To setup a port forwarding entry:
1. Click the Add button.
2. Enter the Service Name.
3. Enter the external port of the computer running the service application in the External Port
field.
4. Enter the IP address of the computer running the service application in the Internal IP field.
5. Enter the internal port of the computer running the service application in the Internal Port
field.
6. Select the protocol used for this application in the Protocol drop-down list, either TCP, UDP,
or BOTH.
7. Enable the Enable this entry checkbox.
8. Click the OK button.

5.5.5 Port Triggers

Choose menu "Advanced→ NAT Forwarding→Port Triggering", you can view and add port
triggering in the next screen shown below. Some applications require multiple connections, like
300Mbps Wireless N DOCSIS 3.0 Cable Modem Router User Guide
icon to enable the function. If this function has taken effect, the icon
icon to edit the corresponding entry. If you want to delete this entry,
icon.
Figure 5-33
53