Table of Contents
Advertisement
See also "Settings for multimedia messages" on p. 101, "Settings for e-mail"
on p. 103, and "Phone browser service settings" on p. 126.
Note: To use a data connection, the system service provider must
support this feature, and if necessary, activate it for your SIM card.
Access point name
needed to establish a connection to the GPRS system. You obtain the
access point name from your service provider.
Dial-up number
(for GSM data and high-speed data only)—The modem
telephone number of the access point.
User
name—Write a user name if required by the service provider. The user
name may be needed to make a data connection, and is usually provided
by the service provider. The user name is often case-sensitive.
When you are writing, press the * key to open the special characters table.
Press the 0 key to enter a space.
Prompt
password—If you must key in a new password every time you log
on to a server, or if you do not want to save your password to the phone,
choose Yes.
Password—A password may be needed to make a data connection, and is
usually provided by the service provider. The password is often case-sensitive.
When you are writing the password, the characters you enter are shown
briefly and then changed to asterisks (*). The easiest way to enter numbers
is to press
and select
Authentication—Normal
Gateway IP
address—The IP address used by required browser gateway.
Homepage—Depending on what you are setting up, enter one of
the following:
•
the service address
•
the address of the multimedia messaging center
(for packet data only)—The access point name is
Insert number
/ Secure.
[ 40 ]
and then continue entering letters.
Advertisement
Table of Contents
