Table of Contents
Advertisement
Swap
is used to switch between the active call and the call on hold.
Transfer
is used to connect an incoming call or a call on hold with an active
call and to disconnect yourself from both calls.
Send touch tones
is used to send touch tone strings, for example, passwords
or bank account numbers.
1
Key in the digits with the 0–9 keys.
Each keystroke generates a touch tone, which is transmitted while the
call is active. Press the * key repeatedly to produce: *, p (inserts a pause
of about two seconds before, or between touch tone characters.), and w
(if you use this character, the remaining sequence is not sent until you
press
Send
again during the call). Press the # key to produce #.
2
To send the tone, press OK.
You can also store a sequence of touch tones for a contact card. When
you make a call to the contact, you can retrieve the sequence. Add touch
tones to the phone number or
Note: Touch tones are the tones you hear when you press the number
keys on the phone keypad. Touch tones allow you to communicate
with voice mailboxes and computerized telephony systems.
Settings for call forwarding
When call forwarding is activated, you can direct your incoming calls to
another number, for example, to your voice mailbox number. For details,
contact your service provider.
Go to Menu→ Tools→ Forward.
•
Select one of the forward options, for example, select
forward voice calls when your number is busy or when you decline
incoming calls.
•
Select Options→
the forward setting off, or
is activated or not.
•
To cancel all active forwards, select Options→
Touch tone
Activate
to set the forward setting on,
Check status
[ 25 ]
fields in a contact card.
If busy
to check whether the forward
Cancel all
Your phone
to
Cancel
to set
forwards.
Advertisement
Table of Contents
