SET A CALL COST LIMIT
1
Select Options→ Settings→
2
The phone requests you to enter the limit in units. For this you may
need the PIN2 code. Depending on the
either the amount of charging units or currency.
When the charging limit you have set yourself is reached, the counter
stops at its maximum value and the note
displayed. To be able to make calls, go to Options→ Settings→
limit→ Off. For this you need the PIN2 code. See "Security" on p. 44.
Note: The actual invoice for calls and services from your service
provider may vary, depending upon system features, rounding-off for
billing, taxes and so forth.
ERASE CALL COST COUNTERS
Select Options→
an individual event, scroll to it and press
GPRS data counter
Go to Log→
GPRS
Allows you to check the amount of data sent and received during packet
data (GPRS) connections. Check with your service provider for information
on how you will be charged.
View the general log
Go to Menu→
Log
In the general log, for each communication event, you can see the
sender or recipient name, phone number, name of the service provider,
or access point.
Note: Sub-events, such as a text message sent in more than
one part and packet data connections, are logged as one
communication event.
Call cost
Clear
counters. For this you need the PIN2 code. To clear
counter.
and press
.
[ 29 ]
limit→ On.
Show costs in
setting, enter
Reset all calls' cost counter
.
Your phone
is
Call cost