Nokia 3620 User Manual page 48

If access points are defined, to create a new access point, select
Options→ New access point
• Use default settings
changes and press
• Use existing settings
for the new access point settings. A list of existing access points is
opened. Select one and press OK. Access point settings are opened
with some fields already filled.
Delete an access point
In the list of access points, scroll to the access point you want to remove
and select Options→ Delete.
Edit an access point
When you open Access points, the list of already available access points
opens. Scroll to the access point you want to edit, and press
Options when editing access point settings are: Change,
settings, Help, and Exit.
Here you can see a short explanation for every setting that may be needed
for different data connections and access points.
Note: Start entering settings on
the list from there because depending on which data connection
you select (Data
IP address, only certain setting fields are available.
Note: Follow the instructions given to you by your service provider
very carefully.
Connection name—Give a descriptive name for the connection.
Data bearer—The options are
Depending on what data connection you select, only certain setting fields
are available. Fill in all fields marked with
with a red asterisk. Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
and select:
to use the default settings. Make the needed
Back to save the settings.
to use existing setting information as the basis
Connection name
bearer) or whether you need to insert a
GSM data,
[ 39 ]
and go down
High speed GSM, and GPRS.
Must be defined, or marked
Settings
.
Advanced
Gateway