10.2.4 Or Greater; For Usb Interface Cable Users - Brother DCP-110C Quick Setup Manual

Step 2

For USB Interface Cable Users

For Mac OS
Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 4 - 9.
For Mac OS
upgrade to Mac OS
(The latest information for Mac OS
please visit at: http://solutions.brother.com)
1
Disconnect the machine from the power
socket and from the Macintosh
already connected an interface cable.
(Example for the U.K.)
2
Turn on your Macintosh
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here OSX icon to
install the printer driver and scanner driver.
If the language screen appears, select your
language.
5
Click MFL-Pro Suite to install.
20
Installing the Driver & Software
®
X 10.2.4 or greater
®
X 10.2.0 to 10.2.3 user, please
®
X 10.2.4 or greater.
®
, if you have
®
.
6
Follow the on-screen instructions, and
restart your Macintosh
®
X,
7
After the DeviceSelector window appears,
connect the USB interface cable to your
Macintosh
The DeviceSelector window will not appear
if the USB interface cable has been
connected before restarting your Macintosh
or if you are overwriting a previously installed
version of the Brother Software. If you
encounter this problem continue with the
installation skipping step 10 and then see the
Software User's Guide Chapter 8 for details
on selecting what machine the
ControlCenter2.0 will connect with.
To connect the USB cable to the machine:
1. Lift the scanner cover to its open
2. Connect the USB cable into the USB
®
.
®
and then to the machine.
position.
socket, marked with a
will find the USB socket above and to the
left of the ink cartridge slots, as shown
below.
®
symbol. You