Brother DCP-110C Quick Setup Manual page 18

Step2
For Network Interface Cable Users (DCP-310CN only)
(For Windows
If you see the following screen, click OK to
install the Windows
updates are installed your PC may restart.
Note: If it does the installation will
automatically continue.
If the installation does not continue
automatically, please open the main menu
again by ejecting then reinserting the
CD-ROM disc or double-click the setup.exe
program from the root directory, and
continue from Step
Suite.
7
After reading and accepting the ScanSoft
PaperPort
Yes.
8
The installation of PaperPort
automatically start and is followed by the
installation of MFL-Pro Suite.
9
When the Brother MFL-Pro Suite Software
License Agreement window appears, click
Yes, if you agree to the Software Licence
Agreement.
16
Installing the Driver & Software
®
98/98SE/Me/2000 Professional/XP)
®
updates. After the
6
to install the MFL-Pro
®
9.0SE License Agreement, click
®
9.0SE will
0
Select Network Connection, and then click
Next.
A
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another, please wait for a
while.
B
If the machine is configured for your
®
network, select the machine from the list,
and then click Next.
This window will not appear if there is only
one machine connected on the network, it
will be selected automatically.
If the machine is not yet configured for use
on your network the Configure IP Address
window will appear. Enter the IP address
information appropriate to your network by
following the on-screen instructions.
C
When the Brother and ScanSoft on-line
Registration screen is displayed, make your
selection and follow the on-screen
instructions.