Stereo Out; Stereo Out Connectors; Patching The Stereo Out To Outputs; Routing Input Channels To The Stereo Out - Yamaha DM 2000 Owner's Manual

82
Chapter 8—Stereo Out

8 Stereo Out

Stereo Out Connectors

The Stereo Out is output by the STEREO OUT +4 dB (BAL) balanced
XLR-3-32-type connectors and the STEREO OUT –10 dBV (UNBAL)
unbalanced phono connectors.

Patching the Stereo Out to Outputs

The left and right channels of the Stereo Out can be patched to the Slot Outputs, Omni
Outs, or the 2TR Digital Outputs. See "Output Patching" on page 63 for more information.

Routing Input Channels to the Stereo Out

Input Channels can be routed and panned to the Stereo Out. See "Routing Input Channels"
on page 75 for more information.

Sending Bus Outs to the Stereo Out

Bus Out signals can be sent to the Stereo Out. See "Sending Bus Outs to the Stereo Out" on
page 87 for more information.

Metering the Stereo Out

Stereo Out signal levels can be metered on the Meter pages. See "Metering" on page 103 for
more information.

Monitoring the Stereo Out

The Stereo Out can be monitored via the LARGE and SMALL CONTROL ROOM MON-
ITOR OUTs and the PHONES (see page 132) or the STUDIO MONITOR OUT (see
page 133).

Attenuating the Stereo Out

Stereo Out signals can be attenuated pre-EQ. See "Attenuating Signals" on page 106 for
more information.

EQ'ing the Stereo Out

The Stereo Out features 4-band parametric EQ. See "Using EQ" on page 107 for more infor-
mation.

Grouping Master EQs

The Stereo Out EQ can be grouped with the EQs of other Output Channels. See "Grouping
Output Channel EQs" on page 110 for more information.

Stereo Out Inserts

Internal effects processors and external signal processors can be patched into the Stereo Out
by using the Inserts. See "Using Inserts" on page 111 for more information.
DM2000—Owner's Manual