Rerecording Events - Yamaha DM 2000 Owner's Manual

Start the timecode source.
7
The AUTOMIX [REC] button indicator lights up continuously, and on the Automix Main
and Memory pages, the REC and PLAY buttons appear highlighted.
Adjust the faders and other controls as necessary.
8
Use the SELECTED CHANNEL section to edit the currently selected channel. Channels are
selected automatically when the [AUTO] buttons are pressed. You can punch channels out
of recording by using the [AUTO] buttons.
9 To stop Automix recording, stop the timecode source, or press the STOP but-
ton on the Automix Main or Memory page.
A confirmation message appears asking if you want to update the existing Automix data
(i.e., keep the edits just recorded).

Rerecording Events

Events can be rerecorded as many times as you like. Remember, however, that unlike the
first pass, on subsequent passes, existing events for the currently punched in parameter are
overwritten, so use the OVERWRITE buttons and [AUTO] buttons with care. Instead of
using the [AUTO] buttons to punch in an entire channel, you can reduce the risk of over-
writing important data by punching in and out individual parameters (see page 175). Use
the Update To End option to determine how existing events are handled when rerecording
is stopped (see page 165). Use the Edit Out (see page 166) and Fader Edit (see page 167)
options to determine how Fader events are rerecorded.
Rerecording Events
DM2000—Owner's Manual
173