Pitney Bowes DM125 Installing Manual page 9

Option 2: Setup Connectivity Using Constant Connection LAN Adapter
Constant Connection is an option that allows you to connect your DM125 system to the Pitney Bowes
Data Centre via a LAN network that has internet access. Constant Connection provides faster
transmission speed while connecting though your local network.
1.
Be sure the meter is turned OFF. The ON-Off switch is located on the back of the meter.
Connect the short USB extension cable (approximately 6") between the back of your meter, and the
2.
LAN adapter as shown. Make sure no cables are connected to the ports marked with a red X as
indicated in the diagram.
Plug one end of the Ethernet cable included in the kit into a network connection on the wall. Plug the
3.
other end of the Ethernet cable into the network adapter as shown and then proceed to step "4".
page 8