Step 8. Print a Test Pattern
1.
When prompted, insert a spare envelope or a tape sheet for a test print.
registration
wall
Determine if the quality of the test print is good by comparing it to the examples below.
2.
Good test print - no missing lines
If the test print is good, press the green Yes/Enter key.
3.
If the test print is poor, press the No key to perform additional maintenance.
Note: if you try maintenance 3 times and is still not correct please call 1-800-672-6937 and select
options for technical support for help
No
Yes/Enter
i
For proper printing, position
mail flat against registration
wall and gently slide test
piece to the right on feed
deck.
The system will detect the
envelope and automatically
feed it through the printing
mechanism.
Poor test print - missing lines
page 15