Furuno FELCOM 19 Installation Manual page 24

3. INITIAL SETTINGS
File
1:
2:
|
|
MENU
|
|
|
|
|
3) Select [Fore Color].
4) Use
5) Select [Back Color].
6) Use
7) To select colors for other windows repeat steps 2)-6).
12. Press the Enter key to show the [Update] window.
13. [Yes] is selected; press the Enter key.
14. Press the Esc key several times to return to the standby display.
To restore all default color settings, select [Window Color] from the [Terminal Setup]
menu, select [Load Default], press the Enter key then press the Enter key again.
3-8
EDIT
Edit Transmit EGC Reports
< [1] UNTITLED1 >
CAUTION
or key to select a color.
or key to select a color.
Logs Options Setup
MESSAGE
BASE WINDOW
StopAlarm