Siemens gigaset se 105 Quick Installation Manual page 28

Quick Installation Guide
Connecting and configuring further PCs (optional)
If you have configured a PC for working with the router, you can connect additional PCs
to it. You will need an additional cable for each PC you want to connect via cable. For
wireless connection of further PCs you will need a wireless network adapter, e. g. a
Gigaset USB Adapter 11 or a Gigaset PC Card 11.
Wireless
1. Install wireless network adapters to the other PCs following the corresponding
operating instructions, making sure that the SSID of all wireless network
components is identical. The factory set SSID is ConnectionPoint. For security
reasons, you should change this setting at a later time.
2. Set up the network for each newly connected PC. This can be done by following the
steps described on page 23.
3. Always reboot the PC.
Wired
1. Connect the network cards for the other PCs to a free LAN socket (LAN1 - LAN4) to
the router with an Ethernet cable.
2. Make sure that the corresponding Link/ACT-LED on your router lights up.
3. Set up the network for each newly connected PC. This can be done by following the
steps described on page 23.
4. Reboot the PCs.
28