Siemens gigaset se 105 Quick Installation Manual page 26

Quick Installation Guide
7. Then click on Update and confirm your choice in the next window by clicking on
OK.
8. Now update the Web page. To do this, click on Refresh (Internet Explorer) or Reload
(Netscape) in browser toolbar. The user interface will now be in the language you
selected.
9. To configure the router click on Basic Setup.
10. Select your Country and click on NEXT.
11. You do not need to make any changes on the following page for the Wireless
settings. Click on NEXT.
!
12. On the next page select the type of connection you are using. Your Internet service
provider will be able to inform you about the type used and the corresponding
access data.
DSL modem
N
– DSL with fixed IP address
Some DSL Internet service providers assign a fixed (static) IP address to your
router. If this is the case, select the corresponding option and enter the
parameters you have been assigned.
– PPPoE DSL
Enter the user name and password that you have been given by your Internet
service provider.
Example for a user name at T-Online:
100010001000200020002000#0001@t-online.de
The service name is optional, but may be required by some Internet service
providers.
Do not change the entries unless you have a good reason for doing so. Please
read page 27 to find out how to avoid unnecessary connection costs
26
For security reasons, you should however change the SSID of all your
wireless network components at a later stage (please read the
operating instructions on the supplied CD for information on how to
do this).
Connection ID
T-Online No.
User No.: