Advertisement
Hint: Install batteries if you need to use this swing away from an outlet. We recommend
using alkaline batteries for longer battery life.
• Loosen the screws in the battery compartment door with a Phillips screwdriver and
remove the battery compartment door.
• Insert four D (LR20) alkaline batteries into the battery compartment.
• Replace the battery compartment door and tighten the screws.
• If the swing begins to operate erratically, you may need to reset the electronics. Slide the
power switch off and back on.
Note: Low battery power may cause product movement to slow, sound to become faint or
product to turn off all together. If this should happen, use the AC adapter as a power source
or replace the batteries. Replace the batteries with four alkaline D (LR20) batteries.
• Protect the environment by not disposing of this product with household waste
(2002/96/EC). Check your local authority for recycling advice and facilities.
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under
adult supervision.
Battery Installation
1,5V x 4
D (LR20)
8
Advertisement
