Table of Contents
Advertisement
► Console Redirection Settings
The settings specify how the host computer and the remote computer (which
the user is using) will exchange data. Both computers should have the same or
compatible settings. Press [Enter] to go to sub-items:
Out-of-Band Mgmt Port
Terminal Type
The optional settings are: [VT100]; [VT100+]; [VT-UTF8]; [ANSI].
Bits per second
The optional settings are: [9600]; [19200]; [57600]; [115200].
Flow Control
The optional settings are: [None]; [Hardware RTS/CTS]; [Software Xon/Xoff].
►
Network Stack
Press [Enter] to make settings for the following items.
Network stack
Use this item to enable or disable UEFI network stack.
Ipv4 PXE Support
The optional settings are: [Disabled]; [Enabled]. When set as [Disable], IPV4 PXE
boot option will not be created.
Ipv6 PXE Support
The optional settings are: [Disabled]; [Enabled]. When set as [Disable], IPV6 PXE
boot option will not be created.
►
S3-S5 RTC Wake-Up Settings
Press [Enter] to make settings for the following sub-items:
Wake-up System with Fixed Time
37
Advertisement
Table of Contents
