JETWAY MBD-J-JNF9KC-1047 Technical Manual page 38

The optional settings are: [Disabled]; [Enabled].
*When set as [Enabled], the following sub-items shall appear:
Change Settings
Use this item to select an optimal setting for super IO device.
FIFO Mode
The optional settings are: [16-Byte FIFO]; [32-Byte FIFO]; [64-Byte FIFO];
[128-Byte FIFO].
ERP Function
Use this item to enable or disable Energy-Related Products function for this board.
This item should be set as [Disabled] if you wish to have active all Wake-up
functions.
Case Open Warnning
To detect if the case has bee opened or not.
The optional settings are: [Enabled]; [Disabled].
PS2 KB/MS Wake-Up from S3-S5
Use this item to enable or disable PS2 KB/MS wakeup function. This function is
only supported when ERP function is set as [Disabled].
WatchDog Timer
The optional settings are: [Enabled]; [Disabled].
*When set as [Enabled], the following sub-items shall appear:
WatchDog Timer Value
User can set a value in the range of 4 to 255.
WatchDog Timer Unit
The optional settings are: [Sec.];[Min.].
33