Table of Contents
Advertisement
4
4
When digital input (optical or coaxial) is selected, this
•
receiver can only play back Dolby Digital, PCM (32 kHz to
96 kHz) and DTS (including DTS 96 kHz/24 bit) digital
signal formats. The compatible signals via the HDMI
terminals are: Dolby Digital, DTS, SACD (DSD 2 ch only),
PCM (32 kHz to 192 kHz sampling frequencies), Dolby
TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-HD
Master Audio and DVD Audio (including 192 kHz). With
other digital signal formats, set to A (analog).
•
You may get digital noise when a LD or CD player
compatible with DTS is playing an analog signal. To
prevent noise, make the proper digital connections
(page
11) and set the signal input to C1/O1 (digital).
•
Some DVD players don't output DTS signals. For more
details, refer to the instruction manual supplied with your
DVD player.
Input
Input Terminals
function
HDMI
COAXIAL
OPTICAL
BD/DVD
TV
a
CBL/SAT
CD
STRM
BOX
GAME
a.
The HDMI terminals can be used for the TV input by
turning ON the ARC function in the HDMI setting
(page
30).
b.
In order to listen to the audio from the TV that is
connected to this receiver using a analog audio cables,
set-up for analog audio input is required (see
Assign menu on page
29).
Tip
•
In order to enjoy the picture and/or sound from devices connected to each terminal, select the input by doing the following.
Video/Audio (HDMI)
BD/DVD
CBL/SAT STRM BOX
ANALOG
b
TUNER
The Input
GAME
Audio
BD/DVD
CBL/SAT
Audio
Video
CD
TV
AUDIO SEL
BD/DVD
CBL/SAT
19
Basic playback
Audio
(TV input)
1.
TV
Other than TV input
2.
AUDIO SEL
O1
Audio
BD/DVD
CD
CBL/SAT
AUDIO SEL
A
AUDIO SEL
C1
(CD) audio input terminal is
assigned to CD under factory
settings. If you want to
change this to TV input,
please change the settings in
the Input Assign menu
(page
29).
A
2
4
31
TV
Hide quick links:
Advertisement
Table of Contents
