Transportation And Storage; Safe Maintenance; Residual Risks; Parts List - Ryobi RWS1880S13 Original Instructions Manual

Table of Contents

Advertisement

the cradle and be held by the operator.
Electric shock hazard. Do not spray towards electrical
outlets.
After every use, thoroughly wash your hands and any
area where skin has been exposed to the spray.
Maintain the product. Thoroughly inspect both the
inside and outside of the product and examine the
components before each use. Check for cracked
and deteriorated hoses, leaks, clogged nozzles, and
missing or damaged parts. If damaged, have the
product repaired before use. Many accidents are
caused by poorly maintained products.
Remove the battery from the product before draining,
cleaning, or storing to avoid accidental starting.

TRANSPORTATION AND STORAGE

Remove the battery pack.
Ensure that all parts are clean and dry.
Clean all foreign materials from the product.
Drain all spray materials from the spray tank before
storage.
After each use, clean the product as prescribed in this
manual.
The spray wand can be stored in the cradle.
For
transportation,
secure
movement or falling to prevent injury to persons or
damage to the product.
Store the product in a cool, dry and well-ventilated
place that is inaccessible to children. Keep away from
corrosive agents such as garden chemicals and de-
icing salts. Do not store outdoors.
MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, or grease.
WARNING
Do not at any time let brake fl uids, gasoline, petroleum-
based products, or penetrating oils, come in contact with
plastic parts. Chemicals can damage, weaken or destroy
plastic which may result in serious personal injury.
WARNING
Use only original manufacturer's replacement parts,
accessories and attachments. Failure to do so can
cause possible injury, poor performance and may void
your warranty.
Servicing requires extreme care and knowledge
and should be performed only be a qualifi ed service
technician. For service we suggest you return the
product to an authorized service center for repair. When
servicing, use only identical replacement parts.
To avoid serious personal injury, always remove
the battery pack from the product when cleaning or
performing any maintenance.
NOTE: Drain all of the spray materials from the spray
tank into a container approved for chemicals. Do not store
chemicals in the spray tank.
the
product
against

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise and the operator
should pay special attention to avoid the following:
Injuries may be caused or aggravated by prolonged use
of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.

KNOW YOUR PRODUCT

See page 7.
PARTS
1. Spray tank cover/measuring cup
2. Spray wand handle
3. On/off button
4. Trigger with lock-on
WARNING
WARNING
Only make adjustments or repairs described in this
manual. For other repairs, contact an authorised
service centre.
After each use, clean the product as prescribed in this
manual.
Drain and empty the spray tank before cleaning.
Drain the spray materials through the fill area.
Use clean water to clean and rinse the spray tank.
A small amount of mild household detergent may be
added.
Wipe the product with a clean, dry cloth.
It may be necessary to rinse the spray tank more than
once.
Electric shock. Never spray liquid towards electrical
sockets, cables, or appliances.
Contact with hazardous substances. Spray materials
may be harmful if inhaled, ingested, or comes in contact
with skin or eyes. Follow instructions carefully and wear
appropriate protective equipment as prescribed in this
manual.
WARNING
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ows1880

Table of Contents