Operation � Nd Handling Precautions; How To Assemble And Connect The Camera - Hitachi FP-Z31 Operation Manual

· •. :-.
� � :::�:�: �J�: : �i,(. ::; · : : � ;i����: : � :1.:���it:��,.,�·
.:
t : . t'·
i
6. OPERATION AND HANDLING PRECAUTIONS
! : ,
L·
6.1

How to assemble and connect the camera

['
I
i'-
6.1.1 Mountingthelens
A bayonet type of lens mount is used. Secure the lens to the camera with the lens holder lever
When using the auto iris and power zoom functions with electrical power, connect the plug of the lens to
i
the LENS connector
I
I
When attaching the lens, set the filter disc
(Power will still be supplid to the lens connected even when the POWER OPE/STANDBY switch @is set
to STANDBY.)
6.1.2 Mounting the microphone
f i
When securing the MC-30E microphone to the camera for use, mount it onto the microphone mounting
@
shoe and lock it into position with the microphone tightening nut. Connect the microphone cord plug
to the MIC connector
,.
6.1.3 Mounting the camera to the tripod
J
;-
�
(1) Mounting the tripod adaptor
000000000000
Fig. 6.1 Tripod adaptor bottom view
(2) Using the tripod adaptor
Fig. 6.2 Mounting the tripod adaptor
: ��;
@.
@
@
and secure the m icrophone cable by the cable clamp
0000
to "4" and set the external power unit switch to OFF first.
o
As shown in Fig. 6.1, 3/8"-16UNC and
1/4"-20UNC screw holes are provided.
Select the hole that provides optimum
balance in accordance with the weight of
. the tripod and camera being used.
o
Loosen the lock knob of the tripod adap­
tor (TA-15), align the front and rear hooks
on the adaptor with the hooks on the
bottom of the camera, rotate the lock
knob and tighten up.
@ .
@ .
\.
13