Recording Tv Programmes Using The Timer - Sony SLV-ED333 Service Manual

QQ
3 7 63 1515 0
Recording TV programmes using the Easy Timer (continued)
To set the clock
1
Hold down EASY TIMER so that DAY appears in the display
window. However, if the clock has already been set, the current setting
appears.
2
Turn EASY TIMER to set the day.
3
Press EASY TIMER.
MONTH indicator and 1 appear in the display window.
4
Turn and press EASY TIMER to set the month, and then the year.
After you set the year, CLOCK appears in the display window.
5
Turn and press EASY TIMER to set the hour and minute.
6
When you have finished setting the time, press EASY TIMER to start
the clock.
Tips
¥ To cancel a Easy Timer setting, press x STOP on the VCR while you are making
the setting.
¥ To check, change, or cancel the programme setting, see Checking/changing/
cancelling timer settings on page 47.
¥ To record NTSC signals in EP mode, set the tape speed to LP. Even when timer
recording is set to LP mode, NTSC signals are automatically recorded in EP
mode.
Notes
¥ If eight programmes have already been set using the TIMER PROGRAMMING
menu, FULL appears in the display window for about five seconds.
¥ The indicator flashes in the display window when you complete the setting in
step 11 with no tape inserted.
¥ When the time is set incorrectly, ERROR appears in the display window in step
11. Set the timer again from step 1.
40 Basic Operations
TE
L 13942296513
Recording TV programmes using the
timer
You can preset a total of eight programmes, including settings made with other timer
methods.
Before you start
¥ Check that the VCR clock is set to the correct time and date.
¥ Insert a tape with its safety tab in place. Make sure the tape is longer than the total
recording time.
¥ Turn on your TV and set it to the video channel.
¥ Refer to Index to parts and controls for button locations.
1
Press MENU, then press M/m/</
MENU
, to highlight TIMER
PROGRAMMING and press OK.
PLAY
OK
2
Set the date, start and stop times
and tape speed:
PLAY
1 Press , to select each item in
OK
turn.
2 Press M/m to set each item.
INPUT
To correct a setting, press < to
SELECT
return to that setting and reset.
¥ To record the same programme every day or the same day every
week, see Daily/weekly recording on page 43.
¥ To record from other equipment connected to one or more of the
LINE inputs, press INPUT SELECT to display the connected line
in the PR position.
3
Press MENU to exit the menu.
MENU
www
Basic Operations
42
.
http://www.xiaoyu163.com
SLV-ED939ME/SG 3-082-203-11 (1) GB ME/SG
P R D A Y S T A R T S T O P
— — — — — — — — : — — — — : — — —
— — — — — — — — : — — — — : — — —
— — — — — — — — : — — — — : — — —
— — — — — — — — : — — — — : — — —
— — — — — — — — : — — — — : — — —
— — — — — — — — : — — — — : — — —
S E L E C T : S E T :
E N D : O K E X I T : M E N U
P R D A Y S T A R T S T O P
3 5 — — — — — — : — — — — : — — —
— — — — — — — — : — — — — : — — —
— — — — — — — — : — — — — : — — —
— — — — — — — — : — — — — : — — —
— — — — — — — — : — — — — : — — —
— — — — — — — — : — — — — : — — —
S E L E C T : S E T :
E N D : O K E X I T : M E N U
x ao
y
i
SLV-ED939ME/SG 3-082-203-11 (1) GB ME/SG
http://www.xiaoyu163.com
8
About the Demonstration Mode
The Easy Timer function has a Demonstration Mode that allows the user, such as a
salesperson, to enter more than eight examples of timer settings when demonstrating
the use of the Easy Timer. It cancels the FULL notice which appears if eight
programmes have already been set. Do not use the Demonstration Mode for making
timer recordings. Doing so may cause the settings to be inaccurate.
To activate the Demonstration Mode
Press X PAUSE on the VCR while turning the EASY TIMER. DEMO
appears in the display window for a few seconds.
To cancel the Demonstration Mode
Turn the power off and unplug the mains lead. Although the Demonstration
Mode is cancelled, the timer settings entered while using the Demonstration
Mode will remain. Be sure to manually cancel the timer settings before you
use the Easy Timer or any other timer method after reconnecting the mains
lead (see page 47).
Q Q
3 6 7 1 3
4
Press ?/1 to turn off the VCR.
The
by for recording.
To record from other equipment, leave the connected equipment
switched on.
To stop recording
To stop the VCR while recording, press x STOP.
Daily/weekly recording
In step 2 above, press m to select the recording pattern. Each time you press
m, the indication changes as shown below. Press M to change the indication
in reverse order.
today t DLY (Monday to Sunday) t W-SA (every Saturday) .....
t W-SU (every Sunday) t 1 month later t (dates count down)
t today
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The
turns off and the VCR switches on. Remember to press ?/1 to reset the
VCR to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
¥ Reset the counter (page 31).
¥ Display tape information on the TV screen (page 33).
¥ Check the timer settings (page 47).
¥ Watch another TV programme (page 34).
To use the Auto Tape Speed function
In step 2 above, press m to select AUTO. When you are recording a
programme in the SP mode and the remaining tape length becomes shorter
than the recording time, the recording tape speed is automatically changed
to the LP mode (or EP mode when you are recording NTSC signals). Note
that some noise will appear on the picture when the tape speed is changed.
To operate this function correctly, the TAPE SELECT setting in the
USER SET menu must be accurate (see page 55).
u163
.
1-10
2 9 9 4 2 8
Basic Operations
1 5 0 5 8 2 9 9 4
SLV-ED939ME/SG 3-082-203-11 (1) GB ME/SG
indicator appears in the display window and the VCR stands
indicator
m
co
continued
Basic Operations
SLV-ED939ME/SG 3-082-203-11 (1) GB ME/SG
9 9
41
2 8 9 9
43