Teac NP-H750 Owner's Manual page 56

5
Turn the MULTI JOG knob to select "Internet",
and then press the ENTER button or the /
button.
p You can check the current firmware version of your
unit using "Setup Menu". Follow the menu items as
follows:
"Setup Menu" w "Information" w "Firmware Version"
6
Disconnect the power cord from the outlet,
connect it again, and then press the STANDBY/
ON button to turn the unit on.
56 56
Updating the firmware (3)
or
Updating the firmware using a USB
flash drive
1
Download the latest version of the firmware
file from TEAC website, save it on a USB flash
drive, and insert the USB flash drive into the
USB port in the unit's front panel.
p For information about downloading the firmware,
see page 53.
2
Follow Steps to
1
ware via the Internet" on page 55 to show
the following on the unit's display.
Setup Menu
›Software Update
3
Turn the MULTI JOG knob to select "USB",
and then press the ENTER button or the /
button.
Installation of the firmware file starts automatically.
4
Disconnect the power cord from the outlet,
connect it again, and then press the STANDBY/
ON button to turn the unit on.
in "Updating the firm-
4
or