Panasonic kx-ta6246 Operating Instructions Manual page 20

1.2 Proprietary Telephone Settings
Trunk Group (G-CO) Key
To use exchange lines efficiently, a group of exchange lines (trunk group) can be assigned to a
line key. This button is referred to as Trunk Group (G-CO) key. Any incoming calls from any
exchange line in the trunk group arrive at the G-CO key. To make an outside call, you can
access an idle exchange line in the group by simply pressing the assigned G-CO key.
PT
CO
Press the programmable button.
!
! • The same line can be assigned as a S-CO key and G-CO key.
• The exchange lines for making and/or receiving calls in trunk groups must be
pre-programmed.
• When your extension is assigned as the incoming call destination for an exchange line, you
cannot receive any incoming exchange line calls unless a G-CO, O-CO or S-CO key
associated with the line is assigned.
DSS (Direct Station Selection) Button
PT
CO
MESSAGE
Press the programmable button.
• 1.3 Making Calls, "Intercom Calling"
1-10
Operations
#
trunk group no.
Dial #. Enter a trunk group number (1 through 6).
1
extension no.
Dial 1. Enter an extension number.
AUTO DIAL
STORE
Press STORE.
AUTO DIAL
STORE
Press STORE.