Panasonic kx-ta6246 Operating Instructions Manual page 120

2.4 Display Example
E D
NGLISH ISPLAY
Back at 11:00AM
BGM off
BGM on
Busy
Busy Ovrde Allow
Busy Ovrde Deny
C.Pickup Allow
C.Pickup Deny
Call on CO 1
Call Prked at 1
Callback All COs
Callback CO 1
Callback CO G1
Callback Ext 201
CO 1
CO 1 0:01'15
CO 1 & CO 2
CO 3 Free
Conference
CO in Use
CO Not Assigned
CW(CO) Off
CW(CO) On
CW(Ext) Off
CW(Ext) On
Data Mode Off
Data Mode On
Day Mode
Do Not Disturb
2-8
Appendix
S D
PANISH ISPLAY
Regreso 11:00AM
Musica Desact
Musica Ambiental
Ocupado
Intrmision Permt
Intrmision NEG.
Permite Recoger
Recoger Negado
Sonando LN 1
Estacionada 1
Llamar Todas LN
Llamar a LN 1
Llamar a LN G1
Llamar a Ext 201
LN 1
LN 1 0:01'15
LN 1 Y LN 2
LN 3 Libre
Conferencia
LN en Uso
LN No Asignada
LE(LN) Desact
LE(LN) Activa
LE(Ext) Desact
LE(Ext) Activa
Modo Data Off
Modo Data Act
Modo Dia
No molester
D
ESCRIPTION
Absent Message 4.
Back Ground Music has been turned off.
Back Ground Music has been turned on.
The doorphone or external pager called is in use.
"Executive Busy Override Deny" has been turned off.
"Executive Busy Override Deny" has been turned on.
"Call Pickup Deny" has been turned off.
"Call Pickup Deny" has been turned on.
An exchange line is ringing at your extension.
A call has been parked.
Callback when free has been set for the first available
exchange line.
Callback when free has been set for line 1.
Callback when free has been set for trunk group 1.
Callback when free has been set for extension 201.
An idle exchange line is selected.
The duration of an incoming call.
A Conference with two exchange lines.
Called by Callback when free (Exchange line recall).
Confirming key programming on the Conference
button.
The selected exchange line is busy.
The desired exchange line is not available (not
assigned).
"Call Waiting" disabled for outside calls.
"Call Waiting" enabled for outside calls.
"Call Waiting" disabled for intercom calls.
"Call Waiting" enabled for intercom calls.
"Data Line Security" is turned off.
"Data Line Security" is turned on.
Day mode status.
— "Time (Day/Night/Lunch) Service"
Confirming the key programming on the FWD/DND
button. "Do Not Disturb (DND)" has been set.