Brother MFC-790CW Quick Setup Manual page 10

11
Enter personal
information (station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
a
Press MENU.
b
Press a or b to display Initial Setup.
c
Press Initial Setup.
d
Press Station ID.
e
Enter your fax number (up to 20 digits) on the
Touchscreen, and then press OK.
f
Enter your name (up to 20 characters) using
the Touchscreen, and then press OK.To enter
numbers or special letters, press
repeatedly until the character you want to enter
appears, then press the character you want to
use.
Note
• If you need to enter a character that is on the
same button as the last character, press c to
move the cursor to the right.
• If you entered a letter incorrectly and want to
change it, press d or c to move the cursor to the
incorrect character, press
g
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.
For details, see Entering Text in Appendix C
of the User's Guide.
10
.
12
Set tone or pulse dialling
mode
Your machine comes set for Tone dialling service. If
you have Pulse dialling service (rotary), you need to
change the dialling mode.
a
Press MENU.
b
Press a or b to display Initial Setup.
c
Press Initial Setup.
d
Press a or b to display Tone/Pulse.
e
Press Tone/Pulse.
f
Press Pulse (or Tone).
g
Press Stop/Exit.