Port Configuration - HP nj2000 User Manual

Port Configuration

This page allows you to configure Jumbo Frames, Speed, Duplex and Flow Control settings for every port
on the switch.
Enable Jumbo Frames - Click box to enable jumbo frames. This setting is applied to all the
ports on the switch.
The Port Configuration table has one row for each port and four columns. The columns are:
Port - The front-panel port-number of the port. This cannot be changed.
Speed/Duplex
Flow Control
There are three main buttons associated with this page:
HELP - Displays this window.
APPLY - Updates the switch configuration. No changes are made to the configuration until this
button is pressed.
CANCEL - All changes made to the page are discarded and the switch configuration remains
unchanged.
Copyright © 2009 3Com Corporation. All Rights Reserved.
3Com Network Jack NJ2000
- A combined data-rate and duplex setting for the port.
- Used to control congestion and to minimize the number of dropped packets.
Page 14 of 44