Cable Diagnostics - HP nj2000 User Manual

Cable Diagnostics

You can perform cable diagnostics for all ports or selected ports to diagnose any cable faults
(short, open etc..) and feedback a distance to the fault.
Cable Diagnostics – Cable diagnostics is performed on a per-port basis. Select the
port number from the drop-down list.
Cable Status – Shows the cable length, operating conditions and isolates a variety of
common faults that can occur on Category 5 twisted pair cabling.
There are two main buttons associated with this page:
HELP - Displays this window.
APPLY - Updates the switch configuration. No changes are made to the configuration until
this button is pressed.
Copyright © 2009 3Com Corporation. All Rights Reserved.
3Com Network Jack NJ2000
Page 19 of 44