Step 8 Wiring The Fireplace - Heat-N-Glo Grand-50 Installer's Manual

Step 8
Wiring the
Fireplace
CAUTION
NOTE
CAUTION
DISCONNECT REMOTE CONTROLS IF YOU
ARE ABSENT FOR EXTENDED TIME PERIODS.
THIS WILL PREVENT ACCIDENTAL FIREPLACE
OPERATION.
For Direct Spark Ignition (DSI) Wiring
ANY REMOTE SWITCHING DEVICE USED FOR
SETTING THE BURNER “HI” OR “LOW” MUST
BE CONNECTED TO THE CORRECT PIGTAIL
WIRES. SEE WIRING DIAGRAM FIGURE 26.
Electrical wiring must be installed by a licensed
electrician.
LABEL ALL WIRES PRIOR TO DISCONNECTION
WHEN SERVICING CONTROLS. WIRING ERRORS
CAN CAUSE IMPROPER AND DANGEROUS
OPERATION. VERIFY PROPER OPERATION
AFTER SERVICING.