The Port Edit Screen - ZyXEL Communications GS1900 Series User Manual

19.6.2 The Port Edit Screen

Use this screen to configure Storm Control settings for individual ports. Click Configuration >
Port > Storm Control > Port > Edit to open this screen.
Figure 103 Configuration > Port > Storm Control > Port > Edit
The following table describes the labels in this screen.
Table 70 Configuration > Port > Storm Control > Port > Edit
LABEL
Port
Port List
State
Action
Broadcast (pps)
Unknown
Multicast (pps)
Unknown
Unicast (pps)
Apply
Cancel
Chapter 19 Configuration: Port
DESCRIPTION
Displays the port list index number(s).
Select Enable to activate traffic storm control on the port(s).
Determines the action the device takes when a limit is reached. The following options are
available:
• Drop - drop the packet when limit is reached.
• Shutdown - shutdown the connection when a limit is reached.
Click the Enable checkbox to active the feature.
Enter the maximum number of broadcast packets the port can receive per second.
Click the Enable checkbox to active the feature.
Enter the maximum number of multicast packets the port can receive per second.
Click the Enable checkbox to active the feature.
Enter the maximum number of unicast packets the port can receive per second.
Click Apply to save the changes.
Click Cancel to discard the changes.
GS1900 Series User's Guide
111