The Port Edit Screen - ZyXEL Communications GS1900 Series User Manual

Table 60 Configuration > Port > Port > Port (continued)
LABEL
Port Name
State
Link Status
Speed
Duplex
FlowCtrl State

19.2.1 The Port Edit Screen

Use this screen to configure Switch port settings. Click Configuration > Port > Port > Edit to
open this screen.
Figure 94 Configuration > Port > Port > Edit
Chapter 19 Configuration: Port
DESCRIPTION
Displays a descriptive name that identifies this port. The length of the name can be up to
32 alpha-numerical characters.
Note: Due to space limitations, the port name may be truncated in some web configurator
screens.
Displays the port status as enabled or disabled.
Displays the link status as up or down.
Displays the speed of the Ethernet connection on this port. The choices are Auto, 10M,
100M, and 1000M.
Displays the duplex mode of the Ethernet connection on this port. The choices are auto,
full, or half.
Displays the flow control state as enabled or disabled. A concentration of traffic on a port
decreases port bandwidth and overflows buffer memory causing packet discards and frame
losses. Flow Control is used to regulate transmission of signals to match the bandwidth of
the receiving port.
GS1900 Series User's Guide
100