The Port Rate Edit Screen - ZyXEL Communications GS1900 Series User Manual

Table 67 Configuration > Port > Bandwidth Management > Bandwidth Control (continued)
LABEL
Ingress Rate
Limit (Kbps)
Egress Rate
Limit (Kbps)

19.5.2 The Port Rate Edit Screen

Use this screen to configure port rate Bandwidth Management settings. Click Configuration >
Port > Bandwidth Management > Bandwidth Control > Edit to open this screen.
Figure 101 Configuration > Port > Bandwidth Management > Bandwidth Control > Edit
The following table describes the labels in this screen.
Table 68 Configuration > Port > Bandwidth Management > Bandwidth Control > Edit
LABEL
Port Rate
Port List
Ingress State
Ingress
Bandwidth
(Kbps)
Egress State
Egress
Bandwidth
(Kbps)
Apply
Cancel
Chapter 19 Configuration: Port
DESCRIPTION
Displays the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming
traffic flow on a port.
Displays the maximum bandwidth allowed in kilobits per second (Kbps) for the outgoing
traffic flow on a port.
DESCRIPTION
Displays the list of port index numbers that are being configured.
Select Enable to activate ingress peak rate limits on the port(s).
Enter the maximum bandwidth allowed in kilobits per second (Kbps) for the outgoing traffic
flow on a port.
Select Enable to activate egress peak rate limits on the port(s).
Enter the maximum bandwidth allowed in kilobits per second (Kbps) for the outgoing traffic
flow on a port.
Click Apply to save the changes.
Click Cancel to discard the changes.
GS1900 Series User's Guide
109